Dry bulk materials
The conveyor carries dry bulk material: grain, crushed stone, pellets, powders. Some material stays on the belt after discharge and spills along the line.
What to check first
- Abrasiveness of the material: it drives filament wear and the choice of filament material.
- Particle size and shape: fine dust and coarse lumps behave differently on a brush.
- Where the cleaning unit sits relative to discharge and the return side of the belt.
Inspection sequence
- Inspect the return side and belt edges after stopping and locking out the conveyor.
- Mark zones where material accumulates: they show where contact is insufficient.
- Measure the belt width and the space available for installing the cleaner.
- Record roller speed or belt speed for the kinematic estimates in the tools.
Scenario limits
| Situation | What to consider |
|---|---|
| Highly abrasive material | Filament wear accelerates; filament material and spare parts are discussed with the manufacturer. |
| Powdery material | Dust calls for attention to unit enclosure and plant maintenance procedures. |
| Coarse lump material | Impact on the unit: mounting and protection are topics for manufacturer documentation. |
The table can be scrolled horizontally.